How To Use

1. Remove the unit from its packaging

2. To begin using the COOL/HUMIDFY function, open and remove the water tank located at the back of the unit and fill to the MAX fill line.

3. For extra cooling power, place an ice pack (supplied) into the water tank.

4. Open the horizontal louvres.

5. Plug into a power supply and press the ON/OFF button to start the appliance.

6. The unit will operate initially on a continual basis. If a set period of operation is required, please follow the TIMER instructions on page 8.

7. Select the desired FAN SPEED by pressing the FAN SPEED button. Refer to page 8 for different settings.

8. Select the operation MODE as required, by pressing the MODE button. Refer to page 8 & 9 for different settings.

9. Press the LEFT / RIGHT swing function as required.

10. To switch the unit off at any time, press the OFF button.

See below:

1. Disconnect the appliance from the main supply.

2. Completely remove the water tank from the unit.

3. Remove any deposits or dirt from the tank with a mild, soapy detergent and cloth. Note: for hard water areas use a citric acid solution to descale & clean the tank. Mix 1 part citric acid to 20 parts water.

4. Flush the tank with clean water.

5. Replace the tank and make sure the lock is in place.