First Time Use & Tips

See below:

1. To turn the unit ON turn the control dial anti-clockwise.

2. Turning the dial one click anti-clockwise, activates the FAN ONLY setting. This setting will not produce heat.

3. Turn the dial anti-clockwise to the '1' position to activate the LOW POWER heat setting.

4. Turn the dial anti-clockwise to the '2' position to activate the HIGH POWER heat setting.

5. Alternatively, to operate with the thermostat function, turn the dial to the desired THERMOSTAT SETTING. The unit will work to maintain the set temperature cycling ON and OFF as required.

6. The unit is equipped with an oscillating base. To activate, switch the OSCILLATION button at the back of the unit to the 'I OSC'. To turn the oscillation function off, switch the button to the 'O' position to cancel.

Yes. The heater is fitted with a temperature limiter which will turn OFF the heater should it overheat for any reason. The product will return to normal operation after the cause of the overheating has been rectified.

Over time, dust can accumulate on the heater which can effect performance. It is recommended to clean the unit at least once a month.

1. Turn the unit OFF and disconnect the appliance from the power supply.

2. Remove any dust build up with a soft brush.

3. Wipe the surface of the unit with a soft damp cloth. Mild detergent can be used for any stubborn marks.