How To Use

1. Remove the unit from its packaging

2. Plug the unit into a power outlet, a ‘beep beep’ will sound and the unit will be in standby mode.

3. Press the “On/Off” button to turn the unit On.

4. Press the “Fan Speed” button to change the fan speed (low, med, high).

5. The unit defaults in “Normal” mode. Press the mode button to change to Natural or Sleep Mode.

6. The unit will operate initially on a continual basis. If a set period of operation is required, please follow “TIMER” instructions in the instruction manual.

7. To activate 360° oscillation, press the oscillation button. To turn off oscillation, press again.

8. To switch the unit off at any time, press the “On/Off” button.

During Summer, pointing the air circulator towards a wall halfway between the floor and the ceiling, as well as using the highest setting, will set up a high speed air circulation pattern. This will cool down the room in an efficient manner. Pointing towards your air conditioner will help distribute the cool air faster, saving time and energy; essentially Turbo boosting your A/C. During Winter, the use of a heater alone produces warm air that rises naturally to the ceiling. By pointing the air circulator upwards, and utilising the lowest speed setting, the hot air will circulate with the cooler air near the floor, resulting in a more even room temperature.

Over time, dust can accumulate on the rear grille cover and fan blades, which can affect the fans performance. It is recommended to clean the fan at least once a month.

1. Turn the unit OFF and disconnect the appliance from the power supply.

2. Remove any dust build up with a soft brush.

3. Wipe the surface of the unit with a soft damp cloth. Mild detergent can be used for any stubborn marks.